METNWS-03-25-21 AG PAGE — POWER LINE SAFETY_PHOTO

The lives of Cody Conrady and his wife Bailey changed in an instant when the sprayer he was working on came in contact with a power line. Conrady lost part of his left arm and part of his right leg from the incident.

SPRINGFIELD — Farm equipment has become more massive and technologically advanced over time. While these welcome improvements help farmers cover more ground in less time, taller equipment and longer extensions may bring added challenges around power lines.

As farmers prepare to enter the fields for planting, Safe Electricity urges everyone working in the agricultural field to be alert to the dangers of working near overhead power lines, poles and other electrical equipment.

Conrady’s story

It was Cody Conrady’s next-to-last day as an assistant manager for an ag fertilizer company. They were understaffed that day, and he jumped in the truck to get ahead of the sprayer. Once the sprayer was in position, he hopped out to fill the tank with fertilizer.

What happened next changed everything.

He and his co-worker inside the cab were unaware that the sprayer boom had either made contact or gotten too close to a power line. Suddenly, 7400 volts of electricity traveled through the boom and electrified the equipment and ground where Conrady was standing. Unfortunately, the unyielding stray voltage considered his body as part of its electrical path to ground.

In the minutes and hours that followed, Conrady was brought back to life, rushed to a local hospital and then transferred via medevac to a Level 1 trauma center. That was the starting point to a very long and arduous road to recovery that included many surgeries, rehabilitation and prosthetics fittings as Conrady had lost part of his left arm and part of his right leg from the incident.

Conrady’s advice

“Pay attention a little more (when working near power lines),” Conrady said. “Keep an eye on your surroundings. Take an extra second to look at things to see how your situation is going to unfold.”

Conrady drives by fields buzzing with activity during active farm seasons and wonders if others see what he sees if they realize the potential dangers of getting too close to power lines.

His wife, Bailey, said this type of accident could happen to anyone. Unintended contact happened in an instant, but its impact lives on long after an accident.

“We knew life wasn’t going to be the same,” Bailey said. “We knew that the ‘normal’ before was not going to be the ‘normal’ after.”

Follow the 10-foot distance rule

To stay safe around overhead power lines, follow safe work practices at all times to help prevent serious, and even deadly, accidents. Start by making sure everyone knows to maintain a minimum 10-foot clearance from power lines.

This 10-foot rule applies not only to the area underneath the power line, but to the full 360 degrees around it. Not only can electricity change paths if direct contact is made, it can also happen when someone or something gets too close to a power line and the current jumps, also known as arcing.

Other precautions

In addition to the 10-foot rule, take these steps to help decrease the chances of an electrical-related incident:

• If your machinery or vehicle comes in contact with a power line, do not get out of the cab because you could be electrocuted. Instead, stay where you are and call 911 to dispatch the appropriate utility to de-energize the power.

• If it is not safe to stay in the cab due to fire or smoke, make a solid, clean jump with both feet landing at the same time. Hop away with feet together as far as you can.

• If you come across an accident or incident near a downed power line, alert individuals (from at least 50 feet away) to stay in the cab or vehicle as long as there is no imminent danger. Call 911 and do not approach the scene.

• Have a daily meeting with staff to go over possible hazards. Map out and review routes where equipment will be moved and ensure it will clear power lines.

• Teach anyone working with or for you (including family members and seasonal employees) about power line awareness and proper clearance distance.

• When working around power lines, always use a spotter who has a broader vantage point than the person in the cab.

• Visually inspect overhead lines, which may not meet height codes due to age or pole damage. If a wire is hanging low, never try to move it; instead, contact your electric utility for assistance.

• Lower extensions to the lowest setting when moving loads.

“Even though planting season is a busy time filled with stress and tight deadlines, take time for safety, including electrical safety,” said Erin Hollinshead, executive director of Safe Electricity. “It could save your life or the lives of others.”

For more information about electrical safety, visit SafeElectricity.org.

(0) comments

Welcome to the discussion.

Keep it Clean. Please avoid obscene, vulgar, lewd, racist or sexually-oriented language.
PLEASE TURN OFF YOUR CAPS LOCK.
Don't Threaten. Threats of harming another person will not be tolerated.
Be Truthful. Don't knowingly lie about anyone or anything.
Be Nice. No racism, sexism or any sort of -ism that is degrading to another person.
Be Proactive. Use the 'Report' link on each comment to let us know of abusive posts.
Share with Us. We'd love to hear eyewitness accounts, the history behind an article.